Filter
Top Products
Vacuum Cleaner Assembly
1
Stand the vacuum upright and slide the base of the
handle firmly into the grooves at the top of the
vacuum body.
2
Check to be sure the handle is fitted to the cleaner
body. If there is a gap in front, continue to push
firmly until the handle is flush.
3
Insert the two screws provided into the existing
holes. Tighten the screws securely with a
screwdriver. Before securing the handle, please
check that the handle is fitted to the vacuum body
and there’s no gap between them. If there is a gap
or the screw is loosened, cleaner won’t turn on.
1
Unlock the dirt cup from the cleaner body.
2
Insert the dirt cup handle into the dirt cup as shown.
Press firmly until it locks in place.
3
Insert the dirt cup into the cleaner body and lock.
AB
Carton contents
Attach Handle To Vacuum
Attach Handle To Dirt Cup
A
B
Empty carton. Find the parts shown above
before disposing of packing materials.
A. Handle section(with 4 screws)
B. Cleaner body
Accessories
The accessories are packed on the cleaner.
Not all accessories are included with every model.
C. Hose D. Extension wand
E. Crevice tool F. Powered hand tool
G. Dusting Brush (Turbine Brush)
H. Upholstery Brush (Furniture nozzle)
The dirt cup assembly consists of the following parts;
* Dirt Cup (A)
* Dirt Cup Handle (B)
CD E F G H
44