Filter
Top Products
Maintenance
1111
Clearing Clogs
Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the
sound of the motor or a reduction in the spinning action, check for clogs.
1
Unplug cleaner from electrical outlet.
2
Empty Dirt Cup.
3
Check Case filter for build up or clogs.
4
Remove the Case filter and check the suction inlet for a clog.
5
Grasp the Quick Reach Handle and lift Hose Wand to separate from the
suction opening. Check for a clog in the Base, the Wand or the Hose.
6
Remove the screw attaching the Hose Wand Base to the vacuum.
Straighten the Hose Wand Base and unclog with long, narrow object.
7
Turn the vacuum cleaner off and unplug it. Remove the brush cover, check the air
passageway for obstructions. Remove debris from this area. Reposition brush
cover and eight screws. Tighten screws securely, snap end of brush cover into
place.