Filter
Top Products
Eng-33
06/01/03 13:14:00
DHCP ACCESS
DNS 1 168.126.63.001
DNS 2 168.126.63.002
06/01/03 13:14:00
NETWORK SETTING
[D] 13:14:00
CAM1
2) Move to "DHCP..." by pressing
at NETWORK ACCESS, then press KEY
SWITCH to set to DHCP.
3) DNS 1 and DNS 2 will be automatically set to DNS as shown below.
Use KEY to change it.
4) After setting, move to the main screen by using the MENU BOTTOM.
5) Set values will be stored as shown below. It takes 2 or 4 seconds.
On completion of setting to DHCP setup, the screen, [D] is displayed.
If the network connection is cancelled or cut, [D] starts blinking.
6) You can view the video source of the SSC17WEB from a remote location PC.
7) Make sure the remote PC meets the minimum specification requirements described in
chapters 1 and 2, and make sure that the PC is internet capable and set up to be able to
browse the internet.