Filter
Top Products
Eng-30
3-6) NETWORK SETTING function and setting method
Function: Allows users to select the STATIC (fixed) IP, DHCP, PPPoE of Setting.
Setting method: Move to #6, NETWORK SETUP MENU by pressing KEY at SETUP MENU,
then press the KEY to display the OSD as shown in the figure below.
(The figure shows the initial setting status)
MOVE TO EACH item by pressing KEY, and change the set value.
Static IP User
- Constituted by Static IP on the TCP/IP network
1) Move to "STATIC..." by using
at NETWORK ACCESS, then press KEY
to set STATIC...
(STATIC : Select in case the network configuration of SSC17WEB is fixed IP (Public or Private IP)
2) Move to IP ADDR / GATEWAY / SUBNETMASK by pressing KEY.
3) Press KEY and type in IP ADDR / GATEWAY / SUBNETMASK respectively.
4) DNS 1 and DNS 2 will be automatically set to DNS as shown below.
Use KEY to change it.
06/01/03 13:14:00
NETWORK SETTING
1. NETWORK ACCESS STATIC.../DHCP.../PPPoE...
2. HTTP PORT 00080
NETWORK STATUS
IP ADDR 192.168.1.200
GATEWAY 192.168.1.65
SUBNETMASK 255.255.255.0
DNS 1 168.126.63.001
DNS 2 168.126.63.002
MAC ADDR 00:30:6f:ff:00:00
06/01/03 13:14:00
STATIC ACCESS
IP ADDR 192.168.1.200
GATEWAY 192.168.1.65
SUBNETMASK 255.255.255.0
DNS 1 168.126.63.001
DNS 2 168.126.63.002