Filter
Top Products
Eng-22
2-7) VCR/MENU/ZOOM - KEY
Allows users to switch LIVE MODE to VCR MODE or VCR MODE to LIVE MODE. If VCR MODE
is cancelled, the QUAD picture of LIVE MODE will be automatically displayed. In case any event
happens at VCR MODE such as LOSS or ALARM, the MODE will be automatically switched to LIVE
MODE, and the pre-set operation for the event will be carried out. If there is no external input at VCR
MODE, the OSD "NO SIGNAL" will be displayed.
LIVE MODE: Image and voice signal from CAMERA is displayed.
VCR MODE: External image and voice signal from VCR terminal from the rear of the monitor is
displayed.
ZOOM MODE : Users can move to a target area by pressing KEY left and right at this time.
If KEY is pressed at the target area, the area will be displayed with 2 times larger.
Please refer to the following Chapter 3 for setting method and function of SETUP MENU per item.
DATE/TIME MENU : Setting of Date/Time format and time to be displayed
DWELL MENU : Setting of DWELL TIME at SEQUENTIAL SWITCHING MODE
DISPLAY MENU : Setting DISPLAY MODE
TITLE MENU : Setting camera name
ALARM MENU : Setting ALARM and BUZZER
VIEW EVENT LOG MENU :
VCR / ZOOM / MENU - KEY allows users to enter SETUP MENU, and
set the following items on the SETUP MENU.
2-8) QUAD / PAGE - KEY
Allows users to display QUAD A or QUAD B at QUAD DISPLAY MODE.
QUAD A: QUAD DISPLAY MODE from Camera 1 to Camera 4
QUAD B: QUAD DISPLAY MODE from Camera 5 to Camera 8
Allows users to see EVENT (ALARM, LOSS) list per time,
camera