Filter
Top Products
Eng-28
3-4) TITLE MENU Function setting
Function: Set the title of each camera at your discretion.
Setting method: Move to #4. TITLE MENU by pressing KEY at SETUP MENU,
and press the KEY to display the OSD as shown in the figure below. (The figure
shows the initial setting status.)
Move to a target camera channel by pressing KEY then press the ENTER KEY to
display a cursor at the space of the first character of camera title. Move the cursor to a target character
in OSD box of lower part by pressing KEY, then press the KEY to set the character.
The cursor automatically moves to the next space for a new character after one character is set.
Set the title of camera by repeating the same method.
(Only eight characters are available for a camera title.)
TITLE SETTING
06/01/03 13:14:00
CAMERA1 CAM1
CAMERA2 CAM2
CAMERA3 CAM3
CAMERA4 CAM4
CAMERA5 CAM5
CAMERA6 CAM6
CAMERA7 CAM7
CAMERA8 BCAM8
0 1 2 3 4 5 6 7 8 9 : = . ( )
A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z [ / ] _ ~ +