Filter
Top Products
Eng-21
Chapter 2: MONITOR FRONT PANEL KEY
Function and Using Method
Front Panel
2-1) AUDIO:
Adjust volume control for proper sound level.
2-2) H-HOLD:
Adjusts the horizontal stability of the screen. If the screen collapses in the horizontal direction,
adjust this button.
Adjusts the vertical stability of the screen. If the screen collapses in the vertical direction,
adjust this button.
TALK KEY allows users to transmit voice signal to intended camera by inputting voice with built-in
MIC in the front of the monitor. For this function, select a target camera with the KEY on the
FRONT PANEL, and press TALK/R.RESET/SP SEL KEY. At this time, if a voice signal is generated
through the MIC with the TALK/R.RESET/SP SEL KEY pressed, the signal will be transmitted
to the camera.
A.RESET KEY - Alarm function can be cancelled while the alarm is working.
SP.SEL KEY - allows users to select a camera to exchange voice signals with the monitor at
QUAD DISPLAY MODE. At QUAD DISPLAY MODE, select target camera display by pressing
KEY left or right, and press TALK/R.RESET/SP.SEL KEY. Then "S" OSD will be displayed
on the selected screen. If you want to exchange voice signals with another camera, turn again the
KEY again to select the camera display, and press TALK/R.RESET/SP.SEL KEY. Then, "S" OSD
will be displayed and users can exchange voice signals with the monitor.
2-3) V-HOLD:
2-4) BRIGHT:
Adjusts the brightness of the screen.
2-5) CONTRAST:
Adjusts the contrast of the screen.
2-6) TALK / A.RESET / SP.SEL - KEY