Filter
Top Products
Eng-23Eng-23
Eng-23
2-9) SEQ / PIP - KEY
It makes a picture switch sequentially. This means that display the picture will be displayed during the
DWELL TIME pre-set at the DWELL MENU of SETUP MENU, and switch the picture automatically
as a pre-set sequence. Please refer to Chapter 3. DWELL TIME MENU function and setting method for
details of DWELL TIME setting.
SEQUENCE MODE
Can be used to see the main screen while Single screen is displayed. The main screen can be changed
and transfered to another channel while PIP is working. Please refer to "CHAPTER 4. DISPLAY
MODE SETTING" for PIP function and details.
PIP MODE
2-10) FREEZE - KEY
This key allows users to see a target camera picture at PAUSE MODE. If users select the camera with
the KEY, and press the FREEZE BUTTON, the OSD "F" will be displayed on pause
picture from the camera. Other FRONT KEY input is ignored at FREEZE MODE, and other FRONT
KEY inputs will be available only after the FREEZE MODE is cancelled.
2-11) - KEY
key, it allows users to
1. enter SET UP MENU movement and SETTING MODE and set data, and
2. display single camera picture. Please refer to the below picture.
using method at MENU setting
Used to change data value after moving to setting mode by using key left or right.
KEY using method at MENU setting
Used to enter target setting mode by pressing key.
SINGLE DISPLAY MODE Entering and Function
At QUAD DISPLAY or SEQUENTIAL SWITCHING MODE, pressing the key allows users to enter
the SINGLE DISPLAY MODE to see the image of one selected camera at full screen.
Users can move to another camera image by the key.