Filter
Top Products
34_ Advanced Setting
advanced setting
TO SPECIFY THE TTL OUTPUT OPERATION MODE
This is to switch the TTL output from LOW (0V) to HIGH (5V) when it is activated.
Present the Master Card to the device.
Press Button
7
and Button
1
in sequence and press
ENT
.
To release the setting, repeat Step 1 above, select the
<
7
2
> buttons and press
ENT
.
The default is set to “switch from HIGH(5V) to LOW(0V)”.
TO SET THE CHIME BELL FUNCTION
You can specify the use of the chime bell.
Use the chime bell in the TTL level (5V) for this purpose.
The default output time is 5 seconds. For changing the output time, refer to “To specify the chime bell operation time” on
page 35.
Present the Master Card to the device.
Press Button
7
twice and press
ENT
.
twice and press
<
7
8
> buttons and press
ENT
.
The default is set to “use the chime bell”.
1.
2.
•
M
1.
2.
•
M
X Y Z
[ \ ]
^ _ `
lzj lu{
W
i
zzhTzYWWW
tGj
X Y Z
[ \ ]
^ _ `
lzj lu{
W
i
zzhTzYWWW
X Y Z
[ \ ]
^ _ `
lzj lu{
W
i
zzhTzYWWW
tGj
X Y Z
[ \ ]
^ _ `
lzj lu{
W
i
zzhTzYWWW