Filter
Top Products
ROBERTS GORDON
®
CRV-SERIES SUBMITTAL SHEET
© 2004 Roberts-Gordon
BE FORE INSTAL LATION AND OPERATION OF HEATING EQUIPMENT, READ AND UNDERSTAND T HE INSTALLATION, O PERATION AND SE RVICE MANUAL.
APPLICAT IONS, ENGINEERING AND DETAILED GUIDANCE ON SYSTEMS DESIGN, INSTALLATION AND PRODUCT PERFORMANCE IS AVAILABLE UPO N REQUEST. ROBERTS GORDON
®
PRODUCTS ARE TO BE
INSTALLED ONLY I N ACCORDANCE WITH L OCAL LAWS, CODES AND REGULATIONS, AND ONLY BY A CONTRACTO R QUALIFIED IN THE INSTALLAT ION AND SE RVICE OF GAS-FIRED HEATING EQUIPMEN T.
Universal Shield
Barrier Shield
Tube
Universal Shield
Bracket Assembly*
Hex Nut*
Shield Support Bracket*
Stud*
Tube and Reflector Support Assembly*
Flattened
Section
Standard Reflector
* Included in Universal Shield
Support Package.
Description Part Number
Universal Shield 02751801
Universal Shield with Holes 02751800
Universal Shield Support Package 02712100
Tube and Reflector Support Assembly 01329802
Universal Shield Support 02751700
Shield Bracket Assembly 02721400
Stud 02790900
Hex Nut 92114800
Universal shields are adjust-
able aluminum reflectors that
can be angled and height
adjusted to direct heat to or
away from a desired area.
Reflector Support Strap Cut Relief Notch
Flatten Reflector Edges
Attach U-Clips
Tube and Reflector Hanger
Standard Reflector
Barrier Shield
Description Part Number
Barrier Shield 02750303
U-Clip Package 91107720
Do not install barrier shield less than 20' (6 m) downstream of any burner.
Do not attach end caps to the ends of the barrier shields. For lengths
greater than 8' (2.6 m), use universal shields.
Do not use barrier shields for burner sizes larger than 80,000 btu/Hr.