Filter
Top Products
ROBERTS GORDON
®
CRV-SERIES SUBMITTAL SHEET
© 2004 Roberts-Gordon
BEFORE IN STALLATION AND OPER ATION OF HEATING EQUIPMENT, READ AND U NDERSTAND THE INSTALLATION, OPERATION AND SERVICE MANUAL.
APPLICATION S, ENGINEERING AND DETAI LED GUID ANCE ON SYSTEMS DESIGN, INSTALLATION AND PRODUCT PE RFORMANCE IS AVAILABLE UPON REQUEST. ROBERTS GORDON
®
PRODUCTS ARE TO BE
INSTALLED ONLY IN ACCORDANCE WITH LOCAL LAWS, CODES AND REGULATIONS, AND ONLY BY A CONTRACTOR QUALIFIED IN THE I NSTALLATION AND SERVICE OF GAS-FIRED HEATING EQUIPMENT.
CRV-SERIES ASSEMBLY OVERVIEW
Major Component Descriptions
Burner
Tube
Hot Rolled, Heat Treated or
Coated Aluminized Tube
supplied in 10' (3 m) lengths.
45° Elbow
90° Elbow
End Vent
Coupling Assembly
with Lock
Flex Gas Line
with shut-off cock
Combustion Chamber
Tee
Reflector
(Aluminum or
Stainless Steel)
Alternate overlap as
shown on overview.
Minimum overlap is 7"
(18 cm).
Reflector with Hole
(Aluminum or
Stainless Steel)
Alternate overlap as
shown on overview.
Minimum overlap is 7"
(18 cm).
Tube Adapter
Cross