Filter
Top Products
Regency
®
P36-4 Gas Log Fireplace 25
9) Connect the female connecter on the white wire to the TH terminal
of the valve.
10) Remove the thermodisc cover from the thermodisc plate by undoing
the 2 screws and then remove the wire grommet.
Thermodisc Cover
Thermodisc Plate
Grommet
11) Take the white wire from the kit and the red wire from the burner
ON/OFF switch and place the grommet thru the wires.
12) Place the wire grommet back into the thermodisc cover with the 2
female ends of the wires inside the cover as shown.
13) Connect the female ends of the red and white wires to the thermo-
disc.
14) Reattach the thermodisc plate to the thermodisc cover using the 2
screws removed in step 10.
INSTALLATION