Filter
Top Products
Regency
®
P36-4 Gas Log Fireplace
24
1) Unplug the power source.
2) Remove the top louver (if fi tted) by carefully pulling it out.
3) Install the premium fl ush front top louver in place by sliding the louver
tabs into the louver brackets on the inside top of the fi rebox.
Louver Tab
4) Open the bottom louver.
Premium Flush Front Top Louver in place.
5) Remove the bottom louver (if fi tted) by undoing the 2 screws which
secure the louver to the hinges on the left and right side.
6) Remove the manual control switch bracket by undoing the 2
screws.
7) Remove the burner ON/OFF switch from the bracket using a pair
of pliers and remove the 2 screws that secure the 2 wires on the
valve.
Burner ON/OFF
Switch
8) Install the new ON/OFF switch to the manual control switch
bracket.
Valve
PREMIUM FLUSH FRONT INSTALLATION
INSTALLATION