Filter
Top Products
CONTROLS/ADJUSTMENTS/REPLACEMENTS
THERMOSTAT
The heater is built with a single mechanical thermo-
stat, located in the front panel above the door. The
thermostat maybe set for any desired pool or spa
temperature
TEMPERATURE
SENSOR
MECHANICAL
THERMOSTAT
Fig. # 8060.1
TYPICAL COMFORTABLE
SPA TEMPERATURE
RANGE
KNOBSTOP RING
SET SCREW TYPICAL
COMFORTABLE
POOL
TEMPERATURE
RANGE
Fig. #8104.0
KNOBSTOP ADJUSTMENT
If desired, a higher setting of the thermostat can be
obtained by adjusting the knobstop ring on the dial plate.
Loosen the set screw, adjust the knobstop for the higher
desired temperature setting and retighten the set screw.
19
SECTION 4/SERVICING INSRUCTIONS
General Location of Controls