Filter
Top Products
32
Current Operated Earth Leakage
Breakers
Where the installation is protected by a 30 milliamp
sensitivity residual current device (RCD), the
combined use of your cooker and other domestic
appliances may occasionally cause nuisance tripping.
In these instances the cooker circuit may need to be
protected by fi tting 100mA device. This work should
be carried out by a qualifi ed electrician.
Fitting the plinth
Loosen the 3 screws along the front bottom edge of
the cooker. Hook the central keyhole over the central
screw. Twist and fi t each end keyhole over their
respective screws. Tighten the fi xing screws.
Oven Light
Press the oven light switch and check that the light is
working.
NB The oven light bulb is not included in the
guarantee
Hobplate
Turn on each plate in turn and check that it heats up.
Grill
Open the grill compartment door. Turn on the grill
control and check that the grill heats up.
Oven check
Set the clock to the time of day
When the clock is fi rst connected the display will fl ash
( ) and ( ) alternately.
To set the clock to read the time of day turn and hold
the Timer knob to the clock symbol ( ) and at the
same time turn the Adjusting knob left or right until
the clock shows the time of day. Remember this is
a 24 hour clock. Let go of the Timer knob and it will
spring back to the vertical oven manual setting.
Turn on the ovens and check that the oven fans start
to turn and that the ovens start to heat up. Turn off
the ovens.
Customer care
Please complete your details in this Guide, inform the
user how to operate the cooker and hand over the
Instructions.
Thank you.