Filter
Top Products
25
Oven not coming on when turned on manually
Is the power on? Is the clock illuminated? If not
there may be something wrong with the power
supply. Is the cooker supply on at the isolator
switch? Is the clock fl ashing 0.00? If so set it to
the correct time of day. Has the Timer been set
to AUTO by mistake? If AUTO is showing on the
clock display, press the ‘cook period’ button and
reduce any set cooking time showing to 0.00,
with the (+) and (-) buttons. Press the manual
(
) button twice.
Is the key symbol
( ) showing in the display?
See the Clock section of the instructions for
more information on the key lock feature of the
clock.
Oven not coming on when automatic cooking
Timer set correctly but oven knob left OFF by
mistake?
Is the key symbol
( ) showing in the display?
See the Clock section of the instructions for
more information on the key lock feature of the
clock.
Oven temperature getting hotter as the cooker
gets older
If turning the knob down has not worked or only
worked for a short time then you may need
a new thermostat. This should be fi tted by a
service person.
Grill not cooking properly
Are you using the pan and trivet supplied with
the cooker? Is the pan being used on the
runners, not the fl oor of the compartment? Is the
grill tray pushed fully back to stop?
The oven light is not working
The bulb has probably blown. You can buy a
replacement bulb (which is not covered under
the guarantee) from a good electrical shop. Ask
for an Edison screw fi tting 15w 240v lamp, FOR
OVENS. It must be a special bulb, heat resistant
to 300 °C. See the Customer Care leafl et for
spares by mail order.
Open the oven door and remove the Handyrack
(if fi tted) and oven shelves.
Turn off the power supply.
Unscrew the bulb cover by turning anticlockwise.
Unscrew the old bulb. Screw in the new bulb,
screw back the bulb cover. Turn on the electricity
supply and check that the bulb now lights.