Filter
Top Products
Obtaining Distributed LAN Client Information
StorNext User’s Guide 369
Obtaining Distributed LAN Client Information
If your StorNext configuration includes distributed LAN clients, you can
obtain information through three commands supported by the cvadmin
command:
• proxy
• proxy long
• proxy who
The proxy Command 3
Use the proxy command to display information about the distributed
LAN servers for the file system. In particular, the IP address and port
number on which the distributed LAN server is listening is shown.
This command requires that a file system be selected.
Command usage and output looks similar to this:
snadmin (yy) > proxy
Disk Proxy Server 172.16.82.130 (pmport 49152, pmflags 0x0)
Listening on 172.16.82.130 port 1036
The proxy long
Command 3
Use the proxy long command to display the same information about
distributed LAN servers included in the proxy command output, plus the
tuning parameters for the distributed LAN server systems and a list of
the disks available for distributed LAN usage.
This command requires that a file system be selected.
Command usage and output looks similar to this:
snadmin (yy) > proxy long
Disk Proxy Server 172.16.82.130 (pmport 49152, pmflags 0x0)
Listening on 172.16.82.130 port 1036
windowsize=1024K sbsize=256K sbcount=32
CvfsDisk0 on device:PhysicalDrive1
sectors:156214012 sector size: 512