Filter
Top Products
Chapter 6 Managing the File System
Working With Stripe Groups
StorNext User’s Guide 120
• Realtime MB/sec (optional): The number of megabytes per
second that are available to real-time applications. This is an
optional setting and can be left blank.
• Non-realtime IO/sec (optional): The number of disk I/O
operations per second that are available to non-realtime
applications. This is an optional setting and can be left blank.
• Non-realtime MB/sec (optional): The lower threshold (in
megabytes per second) that is reserved for non-realtime
applications. This is an optional setting and can be left blank.
6 Click OK.
7 After the screen indicates that the stripe group has been modified,
click Close.
Deleting a Stripe Group 6
Use this procedure to delete a stripe group.
1 From the SNFS home page, choose Stripe Groups from the Config
menu. The Configure Stripe Group screen (figure 69
on page 114)
appears.
2 Select from the File Systems drop-down menu the file system that
contains the stripe group you want to delete.
3 Select from the Stripe Groups list the stripe group you want to
delete.
4 Click Delete. A confirmation screen prompts you to confirm that you
want to delete the stripe group.
5 Click OK. The Delete Stripe Group Status screen appears.
6 After the status screen indicates that the stripe group has been
deleted, click Close.
Caution: Deleting a stripe group causes a complete loss of data and
requires re-making the file system. Refer to Making or
Unmaking a File System on page 105.