Filter
Top Products
33
fasten the OSB into the 2x lumber with 8d
nails 6” o.c. or according to the engineers
requirements.
Where vapor retarders are required they
should be applied before the installation of
the Insul-Lam panels. Roof cladding and/or
finish materials should be installed according
to the manufacturer’s specifications and
recommendations.
Electrical
GENERAL GUIDELINES
Never cut long grooves in the skin of
a panel. Long grooves in the skin can
seriously compromise the structural integrity
of your panels. When necessary, you
may cut 4” access holes and use a long
remodelers flex bit with a catch hook to
run wires where a chase may not exist.
Use vertical chases and interior walls whenever
possible for most of your wiring needs.
Use a remodeler’s box that has flanges so the
box can be fastened directly to the panel skin.