![](http://pdfasset.owneriq.net/b/8c/b8c9b01f-3420-4f5d-8abc-c4827e400bd4/b8c9b01f-3420-4f5d-8abc-c4827e400bd4-bg2c.png)
Adjustment
44
1.05.05 Cutting stroke (on model 571)
Requirement
When the edge trimmer is engaged and the needle is in the needle hole, the stroke of
knife 1 should be half in front of and half behind the needle, when the motor shaft is tur-
ned by hand.
● Switch off the machine and engage the edge trimmer.
● Adjust knife 1 (screw 2) according to the requirement.
1
2
Fig. 1 - 35
1/2
1/2
1