Filter
Top Products
Adjustment
38
1.04.29 Lubrication
Requirement
After a running time of 10 seconds a fi ne line of oil should form on a strip of paper held
next to the hook.
● Check whether oil has been fi lled in and that there is no air in the oil lines.
● Let the machine run for 2-3 min.
While the machine is running do not place hands in the needle or hook area!
Danger of injury from moving parts!
● With the machine running hold a strip of paper on the hook and check the requirement.
● If necessary, adjust the oil fl ow on screw 1.
129-011
Fig. 1 - 29
1