Filter
Top Products
Adjustment
11
● Set hook point at needle centre, making sure that the needle is not defl ected by needle
guard 6.
● Adjust needle height according to Requirement 2.
● Adjust hook post according to Requirement 1 and tighten screws 4 and 5.
● Making sure that there is some play in the bevel gear, tighten screws 1.
● With retaining collar 7 touching bevel gear 8 tighten screws 2 and 3.
● Adjust needle guard 6 (screw 9) according to requirement 3.
When the hook is changed, make sure that
the markings 10 and 11 are both on one side.
10
11