![](http://pdfasset.owneriq.net/b/8c/b8c9b01f-3420-4f5d-8abc-c4827e400bd4/b8c9b01f-3420-4f5d-8abc-c4827e400bd4-bg17.png)
Adjustment
23
1.04.14 Stitch length control eccentric
Requirement
When the needle (with maximum stitch length set), coming from TDC, is 3 mm above the
needle plate, the crank 3 must have reached its front point of reversal.
● Set the maximum stitch length.
● lTurn stitch length control device 1 (screws 2) according to the requirement.
Fig. 1 - 14
1
2
3
2