Filter
Top Products
48 C2445M-E (11/05)
Clear
Use this setting to clear user-defined settings or return the dome to factory default settings.
The following are the available CLEAR settings:
ALL ZONES Clears all zones. To clear a single zone, refer to the
Zones
section.
ALL PRESETS Clears all presets. To clear a single preset, refer to the
Presets
section.
ALL PATTERNS Clears all patterns. To clear a single patterns, refer to the
Patterns
section.
ALL WINDOW BLANKING Clears all blanked windows. To clear a single blanked
window, refer to the
Window Blanking
section.
RESTORE FACTORY DEFAULTS Restores all camera settings to factory default settings.
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
RESTORE FACTORY DEFAULTS
BACK
EXIT
CLEAR
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
C2445M-E.pmd 12/14/05, 8:45 AM48