Filter
Top Products
24 C2445M-E (11/05)
Wide Dynamic Range ON Wide Dynamic Range OFF
VIDEO LEVEL
Set the video output to one of the following:
NORMAL 1.0 volt peak-to-peak
HIGH (default setting) 1.2 volt peak-to-peak to compensate for losses in video cable.
WIDE DYNAMIC RANGE
The Wide Dynamic Range (WDR) setting balances the brightest and darkest sections of a scene
to produce a picture that is better balanced in lighting and provides more detail. The range from
the darkest to the brightest sections of the scene is 80X more when WDR is ON than when OFF.
Avaliable settings are OFF and ON. The default setting is OFF. When wide dynamic range is set to
ON the frame rate is reduced from the standard 30 frames per second to 15 frames per second.
BACK
EXIT
ADVANCED SETTINGS
SHUTTER SPEED AUTO
AGC LIMIT 28
AUTO IRIS AUTO
AUTO IRIS LEVEL 66
AUTO IRIS PEAK 8
AUTO SHARPNESS ON
SHARPNESS LEVEL 26
AUTO WHITE BALANCE ON
R GAIN 482
B GAIN 678
BACKLIGHT COMP OFF
VIDEO LEVEL HIGH
WIDE DYNAMIC RANGE OFF
BACK
EXIT
TYPE OF LIGHTING OUTDOOR
AUTO FOCUS ON
ZOOM LIMIT X184
ZOOM SPEED MEDIUM
LOW LIGHT LIMIT 2
IR CUT FILTER AUTO
AUTO IR LEVEL DUSK
<ADVANCED SETTINGS>
CAMERA
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
C2445M-E.pmd 12/14/05, 8:45 AM24