Filter
Top Products
30 C3426M-A (5/07)
Service Connector
The IS110 Series Camclosure integrated camera system includes a service connector that outputs
camera video. Use it at the installation site to set up the field of view and focus the camera.
Figure 16. Service Connector
Pelco offers two optional items that plug directly into the service connector. Before using either
option, you must loosen the tamper-resistant screws to remove the trim ring from the back box. Use
the supplied 1/8-inch hollow screwdriver bit.
The optional CST150 has a 3-foot (0.9 m) cable and microdisplay for viewing camera video. Plug it into
the service connector and view the video.
NOTE: The three buttons on the CST150 are not used with the IS110 Series Camclosure.
The optional ICS-SC is a 4-foot (1.2 m) cable with a service connector and a BNC connector. Plug the
cable into the service connector on the IS110. Then connect the other end to any standard BNC (VIDEO
IN) connector on a monitor.
SERVICE
CONNECTOR