Panasonic AWHE50HN Home Security System User Manual


 
44
Specifications
FUNCTIONS AND PERFORMANCE
[Camera unit]
Imaging sensors: 1/3˝ Full‑HD MOS
Lens: Motorized 18 zoom, f/1.6 to 2.8
(f=4.7 to 84.6 mm; 35 mm
equivalent: 36.9 mm to 664.5 mm)
Focus: Switching between auto and manual
Focus distance: Entire zooming range:
1.5 m (4.9 ft.)
Wide end: 30 cm (0.98 ft.)
Color separation optical system:
On‑chip color filter system
Minimum illumination: 3 lx (50 IRE, F1.6, +36 dB)
Horizontal resolution: 850 TV lines Typ (Center area)
Gain selection: Auto, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB,
15 dB, 18 dB
Storage mode: 0 dB, 6 dB, 12 dB, 18 dB
Electronic shutter speed:
1/100, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
Synchro scan: 60.24 Hz to
646.21 Hz
Gamma: Off, Normal (Low, Mid, High),
Cinema
White balance: AWB A, AWB B, ATW
Chroma amount variability:
7 levels variability
Scene file: FullAuto, Manual1, Manual2,
Manual3
Color bars: FULL BAR
Output format: HD 1080: 59.94i,
720: 59.94p
SD 480: 59.94i
Synchronization system:
[AW‑HE50H]
Internal synchronization
[AW‑HE50S]
Internal/External synchronization
(BBS)
[Pan-tilt head unit]
Installation method: Stand‑alone (Desktop) or
suspended (Hanging)
To ensure safety, the unit must be
secured using the mount bracket
provided.
Camera/pan-tilt head control:
IP connecting
cable
When connecting through a hub:
LAN cable* (category 5 or above,
straight cable), max. 100 m (328 ft.)
When a hub is not used:
LAN cable* (category 5 or above,
crossover cable) max. 100 m (328 ft.)
RP connecting
cable
LAN cable* (category 5 or above,
straight cable), max. 1000 m (3280 ft.)
( Control only: Use of an external device
or some other means must be provided
separately in order to extend the video
signal connections.)
Protocol RS‑422A, AW series protocol
*: Use of an STP (shielded twisted pair) cable is
recommended.
Pan/tilt operation speed:
Max. 90°/sec. or more
Panning range: ±175°
Tilting range: +90° to –30°
Depending on the pan or tilt
position, the camera may be
reflected in the image.
Quietness: NC35 (normal speed),
NC40 (when preset)
AC adapter
Input: AC 100 V to 240 V, 1.5 A, 50/60 Hz
Output: DC 12 V, 2.5 A, 30 W
The provided power cable is for 125 V AC or less.
Use it within AC 100 V to 120 V.
Optional accessories
Wireless remote control AW-RM50G
(Size “AA” dry battery 2, obtained separately)
Direct ceiling mount bracket WV-Q105
Multi-interface cable AW-CA20T6G
Mass and dimensions shown are approximate.
Specifications are subject to change without notice.