Filter
Top Products
34
Network settings
Installing the software
Be absolutely sure to read through the “Readme.txt” on the
CD‑ROM supplied with the unit first before attempting to
install the software.
Software provided on the CD-ROM
Easy IP Setup Software (EasyIPSetup.exe)
This software establishes the unit’s network settings.
For details, refer to the sections that follow.
Use the Easy IP Setup Software
to establish the unit’s settings
The settings related to the unit’s network can be established
using the Easy IP Setup Software supplied.
To establish the settings for a multiple number of units, the
settings must be selected for each camera involved.
If the settings cannot be established using the Easy IP
Setup Software, select the settings separately for the unit
and PC on the network page of the setting menu. For further
details, refer to the “Operating Instructions — <Operations
and Settings>” (PDF file).
If the Easy IP Setup Software is run when using
Microsoft
®
Windows
®
XP Home Edition SP3, an
important warning screen concerning security may
appear.
If this is the case, click the [Unblock(U)] button.
If the Easy IP Setup Software is run when using
Microsoft
®
Windows Vista
®
, you may be prompted to
enter the password for the Administrator account.
If this is the case, disable “User Account Control” from
Control Panel.
The Easy IP Setup Software is designed in such a way
that when around 20 or more minutes have passed
after the power was turned on, the MAC address and IP
address of the target camera will no longer be displayed.
It does this to improve the security.
When “20min” is selected for the enable time among
the Easy IP Setup accommodate period. (page 70 in
the <Operations and Settings>)
The Easy IP Setup Software cannot be used from a
different subnet via a router.
The unit cannot be displayed or its settings established
using an older version of the Easy IP Setup Software
(Ver.2.xx).