Filter
Top Products
8
Tool set includes a hose, wand,
crevice tool, furniture nozzle and
dusting brush.
Attach hose to cleaner
Turn cleaner off before attaching
or removing hose.
With cleaner handle in upright posi-
tion, open hose door and insert
hose connector until locked in posi-
tion. Suction will automatically be
diverted to the hose when cleaner is
turned on.
To remove hose, press latch (D) on
hose connector and pull up.
Edge cleaning
Edge cleaning is provided on both
sides of nozzle to remove dirt in car-
pet near baseboards and furniture.
Guide either side of nozzle parallel
to edge of carpet or furniture.
Stair cleaning
A stair cleaning handle has been
designed for ease in using your
cleaner on stairs. With handle in
operating position, place fingers
under edge of stair cleaning handle
and guide cleaner with other hand
on upper handle.
As an alternative, you may use the
hose and furniture nozzle for stair
cleaning, cleaning from bottom to
top.
When using cleaning tools, the
agitator will continue to rotate.
CAUTION: To avoid personal
injury or unnecessary wear to car-
pet, and to prevent the cleaner
from falling, use extra care if
cleaner is placed on stairs.
Cleaning tools
Note: Hose must be removed from
hose door when cleaning carpet
and rugs to insure proper clean-
ing performance.
CAUTION: Agitator continues to
rotate while cleaner handle is in
upright position. Avoid tipping
cleaner or setting it on furniture,
fringed area rugs or carpeted
stairs.
40
D
37
38
39
Cleaning lightweight
flexible rugs
Stand on one end of rug and move
cleaner toward other end or edge.
Before reaching edge, push down
on handle. This will lift up the nozzle
(front of cleaner) and will prevent
rug from clinging to cleaner. Contin-
ue to lift up nozzle so that when you
have reached the edge, it is com-
pletely off the rug. Move cleaner
back to start again, lower nozzle,
and use only forward strokes.
36