Filter
Top Products
User’s Manual
41
5.4 PTZ Control
5.4.1 Cruise Setup
Open PTZ setting menu if you want to setup cruise function (system default: on), and set up
cruise channel, cruise points etc.
1. Channel Select: Select the channel of the installed PTZ
camera.
2. PTZ direction control: Control PTZ moving direction.
3. Zoom, Focus and Iris Control: control direction, zoom, focus
and iris of PTZ.
4. Presetting PTZ positions-
Use this to pre-set several spots of the PTZ camera for quick
access.
: Go to the selected preset spot.
: Set PTZ preset positions
: Delete Current cruise point.
: Save setting.
: Start PTZ Cruise.
To start Cruise, exit this screen and click “Start Cruise” of the
pop-up menu.
5.5 PIP MODE
Click “PIP MODE” of the pop-up menu to select between one or two small pictures within the
main display.
5.6 Search
Click “Search” of the pop-up menu to open the Video Search screen to display a record.
5.7 Mute
Click “Mute On” of the pop-up menu to enable and display sound.
5.8 Manual Rec
Click “Manual Rec” of the pop-up menu to start manual recording.
5.9 Start Rotate
Click “START Rotate” of the pop-up menu to start displaying videos from each camera in
preset sequence.
5.10 Start Cruise
If you have purchased a PTZ camera separate and would like to start the PTZ camera to start
cruising, click “START Cruise” on the pop-up menu to start the function set in section 5.5.1
1
2
3
4