Filter
Top Products
17
W415-0429 / C / 11.04.05
Lift up and remove the upper
louvres. Open the valve control
door. Release the top and bot-
tom door latches, located at the
right side of the door.
To close the door, repeat in re-
verse order.
The door latch holes are elongated for door levelling.
The door may need to be lifted up at the right side before
latching to ensure the door is level.
Remove the protec-
tive plastic wrap
from the louvres
and install as illus-
trated.
Clip each upper
louvre into a slot on
the louvre bracket.
Ensure that the
louvres are
centered within the
opening.
Secure the lower louvre assembly to the lip of the fireplace
base as shown.
Position the hinge screen into place and with the control
door open, secure to the firebox using three screws.
LOUVRE
BRACKET
FIGURE 36a
UPPER LOUVRE INSTALLATION
A
C
B
L38 LOUVRE INSTALLATION
FIGURE 37 a-c
HOOD
Attach the hood by pressing the
top flange into the clips along
the top of the louvre opening.
Secure using a screw through
the centre slot.
LOWER LOUVRES
Insert the hinge clips into the
slots located at the bottom left
and right corners of the unit.
To remove the louvres, pull the
back tabs of the clips forward,
while pushing the louvre assem-
bly back. Lift the clip.
UPPER LOUVRES
Insert the louvre tabs into the
slots located at the top left and
right corners of the unit.
A
CLIPS
CENTRE
SLOT
FLANGE
SLOT
TAB
B
C
HINGE
CLIP
SLOT
FINISHING
GVFL LOUVRE INSTALLATION
DOOR REMOVAL & INSTALLATION
F