Filter
Top Products
15
W415-0614 / A / 07.24.07
1. Place the
door frame face
down careful
not to scratch
the paint.
2. Center the
gasketed glass
inside the door
frame with the
thick side of the
gasket facing
up.
3. Bend the
glass retainers
located along
the edge of the door frame over the gasket holding the glass
in place. Careful not to break the glass.
LOG SHIPPING BRACKET
DOOR REMOVAL
HEARTH STRIP
CONTROL DOORS
LOG SHIPPING
BRACKET
FIGURE 32
Before the glass door can be removed, the control doors
must be opened and the hearth strip and screen assembly
must be removed.
ROD
HOOKS
FIGURE 33
DOOR
SCREWS
FIGURE 34
FINISHING
Before installing the
logs, you must fi rst re-
move the log shipping bracket.
Lift up to remove. Discard once
removed.
With the control doors pulled open, you can now lift the hearth
strip up and away from the front of the fi replace. The curtain
assembly can be removed by lifting the rod out from the three
hooks at the top inside
edge of the door
opening.
FIGURE 35
LOG
SHIPPING
BRACKET
The glass door is secured to the fi rebox with 7 latches 2 on
each side, and 3 across the top and 2 screws. Pull the handle
of the latch forward, then lift the hooks out from the slot in the
door frame to release the top and sides of the door. With a
Screw Driver remove the 2 screws in the bottom corners of
the door. Lift the door out from the retainer along the bottom
of the door, we recommend 2 people remove door due to
size and weight. Pull the bottom edge of the door out from
the fi replace until the top will pivot forward. Careful door is
very heavy.
GLASS/DOOR REPLACEMENT
GLASS
GLASS
RETAINER
GASKET
DOOR FRAME