19
KEYPAD FUNCTIONS
Activate Program? Activates the Program Mode from Keypad No. 1. Note: This
feature is disabled while armed. (See PROGRAMMING USER CODES)
Activate Download? For installer's use only. If accidentally enabled, press
C to exit. Note: This feature is disabled while armed.
Relay Control? (Relay Control programmed? YES NO).
Turns ON or OFF one or more programmed Relay Groups. Press
J to turn the
displayed group on or off; press NEXT(
E) to proceed to the next group, or
PRIOR (
F) to scroll back to the previous group. Press C when done.
(Note: This function available with GEM-P9600 and GEM-P3200 control panels only).
• Relay Group 01: [ ____________________________________ ]
• Relay Group 02: [ ____________________________________ ]
• Relay Group 03: [ ____________________________________ ]
• Relay Group 04: [ ____________________________________ ]
• Relay Group 05: [ ____________________________________ ]
• Relay Group 06: [ ____________________________________ ]
• Relay Group 07: [ ____________________________________ ]
• Relay Group 08: [ ____________________________________ ]
ACTIVATE
PROGRAM Y/N
ACTIVATE
DOWNLOAD Y/N
RELAY
CONTROL Y/N