Filter
Top Products
18
KEYPAD FUNCTIONS
Activate Telephone Test? (Telephone Test programmed? YES NO). Sends a
communicator test to the central station. A communication failure will be indicated
at the keypad by a system trouble “E03-FAIL TO COMM” display. Repeat the test
to attempt to correct a communication failure, as any successful communication
will clear this display.
Delay Arming 1-4 hours. (Not for UL-listed systems). Your system may be set to
arm automatically after a delay period of 1 to 4 hours.
To Delay Arm the system:
• With the function “TO ARM IN 1-4 HRS“ displayed in the window, enter the
desired Delay Arming time in hours (
1, 2, 3,or 4), followed
by
J.
At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second
warning and the keypad will begin a 15-minute arming countdown with the sounder
pulsing. The sounder may be silenced at this time by pressing C, but it will turn
back on with a steady warning tone 1 minute prior to arming, at which time the
building must be exited.
The same steps can be used to delay a scheduled Auto Arming, if your system has
been programmed as such.
ACTIVATE
DIALER TEST Y/N
TO ARM IN 1-4 HRS
PRESS 1-4 /N