Meyer 4222 Vacuum Cleaner User Manual


 
3200 & 4200 Series -- 48 –
#19-0024
50:1 RATIO, FRONT, LOWER GEARBOX
3200 & 4200 SERIES
KEY PART NO. QTY DESCRIPTION
1 19-0024-1 1 Input Shaft 1” Dia.
2 19-0024-2 1 Output Shaft 2.25” Dia.
(Hollow)
3 19-0024-3 1 Casting, Tapped Holes
4 19-0024-4 1 Casting, Through Holes
5 19-0024-5 1 Worm, 2 Lead RH
6 19-0024-6 1 Worm Gear, RH
7 19-0004-7 1 Bearing Cone, 2” ID
8 19-0024-8 1 Bearing Cup
9 19-0002-3 2 Bearing Cone, 1” ID
10 19-0002-4 2 Bearing Cup
11 19-0024-11 1 Retaining Ring, 1” Shaft
12 19-0024-12 1 Seal, 1” Shaft
13 19-0024-13 1 Seal, 2” Shaft
14 19-0024-14 1 Key, 1/4” SQ
15 19-0024-15 1 Key, 3/8”
16 19-0016-5 4 Plain Plug, ½” NPT
17 19-0023-2 1 Bushing, ½” to 1/8” NPT
18 19-0002-17 1 Pressure Relief, 5psi
KEY PART NO. QTY DESCRIPTION
19 19-0024-19 1 End Plug, Input Shaft, -
2- 5/16” OD
20 19-0024-20 10 SHCS 3/8x1-1/2”
21 19-0016-11 4 SHCS 3/8x2-1/4”
22 19-0024-22 1 Seal 2.25” ID
23 19-0024-23 1 Bearing Cup
24 19-0024-24 1 Bearing Cone, 2.25” ID
25 19-0024-25 1 Retaining Ring 2.25”
26 19-0024-26 1 Grease Zerk
27 19-0024-27 1 Dust Seal, Input
28 13-0010 2 Quill Bushing
29 19-0024-28 1 End Cap, Rubber Cover -
11/2” OD
Use #85W140 wt. Gear Lube Oil ONLY.
DO NOT USE GREASE FOR LUBRICANT.