Meyer 4222 Vacuum Cleaner User Manual


 
3200 & 4200 Series -- 44 –
VARIABLE SPEED SHIFTER CONTROLS AND
EMERGENCY STOP CLUTCH RELATED PARTS
KEY PART NO. QTY DESCRIPTION
1 42-0022-1 2 Linkage Bar
2 42-0021 1 Bolt w/chain& Eyelet
3 42-0013 1 Pipe Guide Bracket
Asm.
4 16-0031 1 Speed Control Pipe
5 16-0029 1 Speed Control Handle
Asm.
6 814-3816-Z 2 3/8 Locknut (Zinc)
7 805-0038- Z 4 3/8 Flat Washer (Zinc)
8 29-0008 2 Spring
9 42- 0020 1 Speed Control Handle
10 42-0019 1 Speed Control Hub
Wldmt
11 851-3816-2Z 1 3/8x2 Machine Bolt
12 827-3118-.38 3 5/16x3/8 Set Screw
KEY PART NO. QTY DESCRIPTION
13 25-0158 1 Quadrant Bracket
Wldmt
14 16-0030 1 Range Control Handle
Asm.
15 42-0018 1 Range Control Hub
Wldmt
16 16-0028 1 Range Control Handle
17 25-0154 1 Control Quadrant
18 25-0151 1 Control Asm.
19 25-0157 1 Speed Control Bracket
20 16-0032-2 1 Range Control Pipe
Ear
21 814-3816-Z 3 3/8 Locknut (Zinc)
22 851-3816-1.25Z 2 Bolt 3/8-16x1.25
23 38-0003 1 Roll Pin
24 16-0032 1 Range Control Pipe
Asm.
25 851-5013-2.5Z 1 ½-13x2-1/2” Bolt
26 814-5013-Z 2 ½-13 Lock Nut
27 828-0050-Z 5 ½” Washer
28 30-0001 2 1/4” Grease Zerk
29 30-0003 1 1/4” 45° Grease Zerk
30 851-5013-2Z 1 Bolt 1/2x2
KEY PART QTY DESCRIPTION
1 36-0001 2 Cables, Emergency Stop
2 16-0010 1 Push Bar, Emergency Stop,
Control
3 36-0002 1 Cable, Emergency Stop
Front,
4 51-0003 1 7/8” ID Rubber Grip Only
5 16-0044 1 I.O.C. Clutch Handle -
Weldment
6 30-0001 1 1/4”-28 Straight Grease
Fitting
7 811-2520-1Z 1 1/4”-20x1” Eye Bolt - Zinc
8 814-2520-Z 1 1/4”-20 Indented Lock Nut
9 851-3816-1.5Z 1 3/8”-16x1-1/2” Machine Bolt -
Zinc GR5
10 805-0038-Z 4 3/8” Flat Washer
11 814-3816-Z 1 3/8”-16 Indented Lock Nut
12 25-0268-1 1 Linkage Extension Plate
13 25-0279 1 Pivot Shaft Weldment
14 33-0048 2 Cable Thimble
INDEPENDENT OUTFEED CLUTCH
IF YOUR UNIT IS OPTIONAL RH DISCHARGE, OPPOSITE TO
ILLUSTRATION, SPECIFY LISTED PART NO. FOLLOWED BY -RH