Filter
Top Products
3200 & 4200 Series -- 13 –
REAR UNLOAD DRIVE COUPLER “SET-UP” (PTO OR HYDRAULIC DRIVE)
WARNING: DISCONNECT PTO DRIVE SHAFT AND HYDRAULIC HOSES (RELIEVE HYDRAULIC PRES
-
SURE) BEFORE CLEANING, ADJUSTING, LUBRICATING OR SERVICING THIS FORAGE BOX. FAILURE TO
HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
COUPLING PLATE
STEP 1
Install Coupling Plate and lynch pin onto the large gear
-
box assembly onthe splined shaft at the REAR
of the for
-
age box.
(Shield Removed For Illustration Purposes Only)
SLEEVE SPACER
QUILL
ZERK
STEP 2
IMPORTANT! (MUST PERFORM)
Install sleeve spacer and lynch pin onto the large gear-
box assembly, splined shaft at the FRONT
of the forage
box. The internal splined shaft will be idling in reverse
and the gearbox quill zerk must be greased daily.
(Shield Removed For Illustration Purposes Only)
WARNING: DO NOT OPERATEWITHOUT ALL SHIELDS, GUARDS AND COVERSINSTALLED. FAILURE
TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.