Filter
Top Products
3200 & 4200 Series --3–
NEW MEYER (FRONT & REAR UNLOAD) FORAGE BOX
MANUFACTURER’S WARRANTY
I. The “Product Registration & Inspection Certificate” along with the original billing invoice “Owner’s Registration Form”
must be completed infull and promptly returned to Meyer Mfg.Corp. for this warranty to become bothvalid and effective.
All warranties onNew Meyer Forage Boxes shallapply only
to the originalretail customer from an authorizedMeyer Mfg.
Corp. dealership.
II. This warranty shallnot
apply to anyMeyer Forage Box which hasbeen subjected to misuse, negligence,alteration, acci
-
dent, incorrect
operating procedures, or which shall have been repaired with parts other than those obtained through
Meyer Mfg. Corp.
III. Meyer Mfg. Corp. warrantsNew Meyer Forage Boxes to be freefrom defects in material and workmanshipunder recom
-
mended use and maintenance service, as stated in the Operator’s and Parts Manual," as follows:
A. Meyer Mfg. Corp. will repair or replace F.O.B. Dorchester, WI, as Meyer Mfg. Corp. elects, any part of a new Meyer
Forage Box which is defective in material or workmanship:
1. Without charge for either parts or labor during the first(1) year from purchase date to the original retail
customer.
2. Without charge for parts only
during the second (2) year from purchase date to the original retail cus
-
tomer.
B. In additionto the abovebasic warranty, MeyerMfg. Corp.will repair orreplace F.O. B.Dorchester, WI asMeyer Mfg.
Corp. elects:
1. Any part of the following which is defective in material or workmanship (not neglect to recommended
use and service) without charge for parts only
(not labor) during the stated time periods from date of
purchase to the original retail customer:
Two (2) Years: a. The 3200 and 4200 Series enclosed main apron drive Superior gearbox assembly, Meyer
#19-0024 and #19-0025.
b. The D667H and D667X pintle main apron chain assembly.
2. Any part of the following which is defective in material or workmanship (not neglect to recommended
use and service)with a “pro-rated” charge for parts only
(not labor) duringthe stated time period from
date of purchase to the original retail customer:
Ten (10) Years: a. The all bolted or all welded steel frame box structure.
b. The aluminized steel or galvaneal steel painted panels which comprise the sides and rear of the
box portion (not front unit) ofthe forage box, upon evidence satisfactory to MeyerMfg. Corp., that
any such panel either rusted or corroded through or cracked or split.
IV. COMMERCIAL USE: Coverage as in paragraph III A1 ONLY, exceptwarranty coverage is for (90)days for parts andla
-
bor to the original commercial retail customer.
V. Repairs eligiblefor laborwarranty must bemade byMeyer Mfg. Corp.or anauthorized Meyer dealership.The originalre
-
tail customer is responsible for the transportation of the forage box to the dealership for warranty service or for any ser
-
vice call expenses.
VI. Except as stated above, MeyerMfg. Corp.shall notbe liablefor injuries ordamages ofany kindor nature,direct, conse
-
quential, orcontingent, topersons orproperty.This warrantydoes notextend toloss ofcrop orfor anyother reasons.
VII. No person is authorized to giveany other warranties or to assume any other obligationon Meyer Mfg. Corp.’s. behalf un
-
less madeor assumedin writingby MeyerMfg. Corp. Thiswarranty isthe soleand exclusivewarranty whichis applicable
in connectionwith themanufacture andsaleof thisproduct andMeyer Mfg.Corp.’s responsibilityis limitedaccordingly.
VIII. This warranty is effective on all sales of Meyer Forage Boxes made after serial #95T2201.
Optional Equipment-Tarp, scales etc. warranty-See original equipment warranty.
Jan. 1, 1995