Filter
Top Products
FRONT UNLOAD VARIABLE SPEED OPERATION WITH INDEPENDENT
OUTFEED CLUTCH
FORAGE BOX CONTROL LEVERS
WARNING: NEITHER THE VARIABLE SPEED
NOR THE HI-LO RANGE CONTROL LEVER WILL DIS
-
ENGAGE THE CROSS CONVEYOR. ONLY THE TRAC
-
TOR PTO, INDEPENDENT OUTFEED CLUTCH, OR
EMERGENCY STOP MECHANISM WILL STOP THE
CROSS CONVEYOR . FAILURE TO HEED MAY RESULT
IN SERIOUS PERSONAL INJURY OR DEATH.
Facing the front of the forage box, the lower most RH
control lever is the INDEPENDENT OUTFEED CLUTCH
control. Moving this control lever down into the “Run” po
-
sition engages the cross conveyor and main drive mech
-
anism. Engage this control lever into the “Run” position
for normal operation. Once thiscontrol lever is engaged,
it acts as the emergency stop when pushing on the
“Warning Push for Emergency Stop” push bar or when
pulling on the emergency stop trip cables.
The LH control lever is the VARIABLE SPEED control.
Moving this control lever regulates rotational speed of
the unloading augers and the forward speed of the main
apron chains, in conjunction with the HI-LO RANGE con-
trol. At the uppermost notch on the control quadrant, the
VARIABLE SPEED control is in“Neutral” position. In this
position, neither the main apron chains advance, nor do
the unloading augers rotate underload, regardless of the
position of the HI-LO RANGE control. Moving the VARI
-
ABLE SPEED control lever downon the control quadrant
increases speed of both auger rotation and main apron
chain forward travel.
The RH control lever is the HI-LO RANGE control. Cen
-
ter detent is the “Neutral” position. Shifting the lever up
on the control quadrant is “LO” RANGE and shifting the
lever fully down is “HI” RANGE. Range selection affects
the forward speed of the main apron chains only. In the
“Neutral” position, the main apron chain does not travel
forward.
Three levers control operating the front unloading unit of
the forage box.
1. INDEPENDENT OUTFEED CLUTCH - IOC
2. VARIABLE SPEED
3. “HI-LO RANGE”
3200 & 4200 Series -- 15 –
DECAL #46-0001-64
VARIABLE
SPEED
CONTROL
LEVER
HI-LO RANGE
CONTROL
LEVER
IOC CONTROL
LEVER