Filter
Top Products
Instructions for Operation (cont'd)
ERASE is the option that can delete all the settings that had OPTIONAL SETTING CHANGES
been programmed previously.While in the programmable There arefive optional settings the owner can change in the
mode, depressing the "ERASE" button will delete a particular programmable control module. To advanceto the Optional
time period that is on display.Depressing and holding the Setting Mode, depress the "PROGRAM" and"MODE" but-
"ERASE" button down for several seconds will erase all the set- tons simultaneously for four seconds. Four zeros should appear
tings for an entire week. This procedure should be adminis- in the upper left hand corner (0000) and a large number 1
tercd carefully, as erasing the entire week's progr'ammed set- should appear in the bottom right-hand corner. This indicates
tings will necessitate a complete l'eprom'amming procedure, the optional menu is on the type of time setting.
OVERRIDE is an option that can be used to temporarily The first optional mode (1) setting involves the type of time
adjust water temperature for aspecific length of time. If for that will appear on the clock display. The default setting is the
example there is a need for higher water temperatures during a normal twelve-hour clock. For military time depress either + or
specific number of hours or days,the "OVERRIDE" button - of the "TIME" button until the description 0001 appearsin
can be depressed. The firstscreen to be displayed is the the upper-left hand comer. To change back to normal time in
HOURS and DAYS time menu and DESIRED optional setting 1 depress either (+ or -) of the time buttons
TEMPERATURE. The default time period is 3 hours. This until 0000 appears in the upper left-hand corner.
time can be adjustedupward or downward byusing the + or - of
the "TIME" button. After holding the + "TIME" button
beyond 24 hours the hours and days designation will appear.
The OVERRIDE can be adjusted for both days aswell as
hours. The maximum number of days to OVERRIDE is 99. _
Override Display L_-_MAWA6 J_
i
| The second optional mode (2) setting involves the temperature
_ _ scale. To change to the temperature setting option, depress the
_w,_ up or down arrow button until the large number 2 appears in
--OVERRIDE the lower right hand corner, The default setting is in the
L_'_JVJ_YI'AG _m | BU1TON
Fahrenheit scale. To change to Centigrade, depress either + or
iJ
- of the "TIME" button until the description 0001 appears in
the upper-left hand corner. To change back to the Fahrenheit
After setting the time duration, the override temperature can scale, repeat the procedure until 0000 appears in the upper-left
be adjusted by using the up ( • ) arrow or the down (•) hand corner.
arrow, located next to the display panel, until the target tem-
perature is displayed. For example, if guests arrive for the
weekend and warmer water temperatures are desired, the i,_ :|
occupant may adjust the temperature setting to 130"F for 2
days and 10 hours. This would control the target temperature _
until the completion of the designated time and return the _
thermostat to the program control that had been in operation _'_MAYFAG _
before the override was implemented.
25