Filter
Top Products
CONTROLS:
1. CONTROL INDICATORS
Comes on when the remote control sends a radio
signal when keys are pressed. When the indicator
blinks only weakly, the batteries have to be
replaced.
2. ARM
Switches on the security system in the Arm Away
mode. All sensors are now activated.
3. DISARM
Switches off the security system.
4. LIGHTS ON
Switches on the lights connected to the lamp
module set to the Home Automation base
address (refer to 6.8).
5. LIGHTS OFF
Switches off the lights connected to the lamp
module set to the Home Automation base
address (refer to 6.8).
7 + 8 PANIC
When both red keys are pressed simultaneously,
an immediate alarm will be initiated by the
security system.
9. BATTERY HOLDER
The battery holder is located inside the remote.
The back of the remote can be easily opened
using your fingernails or a small screwdriver. Only
use 3V lithium batteries model CR2016 (2x).
ACTIVATION:
BATTERIES
The KR21 is supplied with batteries installed.
INSTALLATION (install mode)
Push the ARM key for more than 3 seconds and
release the button; the indicator blinks.
10 MARMITEK
1
2 3
4
7
9
5
8
4.5 KR21 KEY CHAIN
REMOTE CONTROLS
4.6 SYSTEM REMOTE CONTROL SH624
(OPTIONAL FOR MS9470)
CONTROLS:
1. PANIC
When this key is pressed, an immediate alarm will
be initiated by the security system.
2. CONTOL INDICATOR
Comes on when the remote control sends a radio
signal when keys are pressed. When the indicator
blinks only weakly, the batteries have to be
replaced.
3. CONTROL KEYS
To controlling the security system and as well as
the Marmitek X-10 Home Automation modules.
4. DIMMING KEY
To control the light level of lamps which are
connected to lamp modules. Through the control
keys, the lamp module will be activated at first by
pressing the ON key for this module. You then can
control the light level of the lamps by pressing the
DIM or BRIGHT key.
5. MODE SWITCH
The position of this switch defines the functions of
the control keys.
SWITCH IN SEC POSITION:
ARM HOME: the security system is switched into
the partial alarm mode meaning that all
door/window sensors are activated but not the
motion sensors.
ARM AWAY: all sensors of the security system
are activated.