Filter
Top Products
28 Listing Label
© Travis Industries 100-01163 4041129
Listing Label
MODEL:
FREEDOM BAY (FLUSH BAY-96)
DO NOT REMOVE THIS LABEL
Listed Solid Fuel Burning Appliance
Suitable for use in masonry fireplaces.
SERIAL
NUMBER
4800 Harbour Pointe Blvd. SW Mukilteo,
Manufactured By:
PREVENT HOUSE FIRES - Install and use only in accordance with the
manufacturer's installation and operating instructions. Contact your local
building or fire officials about restrictions and installation inspection in your
area. Refer to local building codes and manufacturer's instructions for
precautions required for passing a chimney through a combustible wall or
ceiling. Do not run a chimney connector through a combustible wall or ceiling.
Do not connect this unit to a chimney flue serving another appliance.
Clearances may be reduced by methods specified in NFPA 211, listed wall
shields, pipe shields, or other means approved by local building or fire officials.
Tested to: UL-1482/UL-907 Report No. 6009 (May 1994)
COMPONENTS REQUIRED FOR MASONRY FIREPLACE INSTALLATION:
Surround Panels.
Direct flue connection is optional. Do not remove bricks or mortar from
masonry fireplace.
Note: Replace glass with 5mm neoceramic or ceramic glass only.
For use with solid wood fuels only. Operate only with feed door closed - open to
feed fire only. Do not use a grate or elevate fire - build fire directly on the hearth.
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with July 1990 particulate emission standards.
Date of Manufacture
2004 2005 2006 Jan. Feb. Mar. Apr. May June July Aug. Sept. Oct. Nov. Dec.
DO NOT REMOVE THIS LABEL Made in U.S.A.
Insert Clearance Diagram
Front 16.0 in.
Sides 08.0 in.
MANTEL
HEARTH EXTENSION
FACIA OR TRIM
INSERT
SIDEW
ALL
MN
L
K
8
16
Mantle
with Mantle Shield
Top Facing
with Shield
Adjacent Sidewall
Side Facing
32.0 in.
19.0 in.
30.0 in.
17.0 in.
15.0 in.
13.5 in.
K.
L.
M.
N.
Freedom Bay
Minimum Clearances
to Combustible Materials
Fireplace Insert Installation
IGN 0228
NER-QA219, TL-116