Filter
Top Products
Finalizing the Installation 23
© Travis Industries 4060111 100-01174
Step 2 - Install the twigs, ember chunk, kibbles, and rock wool
Place the left and right
twigs as shown.
Place the ember
chunk as shown.
Place the kibbles in a random
pattern. Make sure to place
them over any exposed
screws or metal to create a
desirable effect. Do not place
kibbles directly over the
burner holes.
Installing the Rock Wool:
The rock wool comes in one clump. Tear off
“dime” sized clumps and flatten. Then pull on
the wool to create gauze-like pieces. Place them
near some of the burner holes. The wool glows
best when very thin and porous.
NOTE: We recommend using very little rock
wool, especially in LP or high-altitude
installations.