Filter
Top Products
44 Room Air Conditioner
Disassembly of the parts (Indoor unit)
Warning :
Disconnect the unit from power supply before making
any checks.
Be sure the power switch is set to “OFF”.
1. To remove the Grille from the Chassis.
- Push mark[ ] on the grille bottom then pull it down
and remove 3 securing screws.
- Lift the both lower parts of panel front.
- After pull down this panel a bit, separate connecting
wire with product.
2. To remove the Control Box.
- Before removing the control box, be sure to
disconnect the wires from PWB.
- Pull the cover control out from the control box
and disconnect other wires.
- Remove securing screws.
- Pull the control box out from the chassis carefully.
CN-TH1CN-UDCN-DC/DC
CN-LR2
CN-LR1
CN-MOTOR 1 (LEFT)
CN-MOTOR 2 (RIGHT)
Panel Front
Connector
∆
Disassembly of the parts (Indoor unit)