Filter
Top Products
- 4 -
Description of the appliance
1
Measurement point
2
Display
3
Material switch (STUD/AC WIRE/METAL)
4
Button – MODE
5
Button – Holding pin
6
Button – READ
7
Button M (Memory)
8
Spirit level
9
Laser
0
Ultrasound sender/receiver
q
Function switch (Laser/Detector/Distance)
w
Button – RM (Read Memory)
e
Button – Holding pin
r
Button +/=
t
Battery compartment
z
Button – PUSH
Items supplied
• 5 in 1 Multi-Measurement Detector with Laser
• 9V block battery
• Operating instructions
Unpacking
Take the Manifold Measurer from its packaging. Remove all transport restraints
and packaging materials. Remove the protective foil from the display
2
.
Inserting the battery
1. Open the battery compartment
t
on the rear side of the Multi-Measurement
Detector.
2. Place the 9V block battery onto the contacts. Pay heed to the correct polarity.
3. Lay the tape for removal of the battery underneath the 9V block battery and
press it into the battery compartment
t
.
Important!
Ensure that the wires are not trapped in any way.
This would lead to irreparable damage to the appliance.
IB_KH3236_BN3376_GB_LB4u5 29.02.2008 18:06 Uhr Seite 4