Filter
Top Products
- 7 -
3. Press the button READ
6
, to measure the length. In the upper line
the measured length appears and „W“ (Width) starts to flash.
4. Press the button READ
6
to measure the width. The measured width appe-
ars on the upper line and the result of the area calculation in the lower line.
Adding areas together
1. Measure an area as described in the section „Measuring areas“.
2. Press the button M
7
. „M+“ appears in the display
2
.
The area measured is now saved.
3. Press the button MODE
4
. The appliance is now ready for the second
measurement.
4. Measure the next area.
5. Press the button +/=
r
. A „+“ appears in the display
2
.
6. Press the button RM
w
. The result of the first measurement is shown in the
lower line.
7. Press the button +/=
r
. Both measurements are added together and
the result is shown in the lower line.
8. Repeat the steps 2 to 7 to add in further measurement values.
9. When you wish to leave the addition mode, press the button MODE
4
.
All values are erased.
Measuring volumes
1. Slide the function switch
q
to „Distance“.
The display
2
switches itself on.
2. Press the button MODE
4
twice. In the display
2
flashes „L“ (Length).
3. Press the button READ
6
, to measure the length. In the upper line the
measured length appears and „W“ (Width) starts to flash.
4. Press the button READ
6
to measure the width. In the upper line the
measured width appears and „H“ (Height) starts to flash.
5. Press the button READ
6
to measure the height. The measured height appears
in the upper line. In the lower line appears the result of the volume calculation.
Adding volumes together
1. Measure a volume as described in the section „Measuring volumes“.
2. Press the button M
7
. „M+“ appears in the display
2
.
The volume measured is now saved.
3. Press the button MODE
4
. The appliance is now ready for the second
measurement.
4. Measure the next volume.
5. Press the button +/=
r
. A „+“ appears in the display
2
.
6. Press the button RM
w
. The result of the first measurement is shown in the
lower line.
IB_KH3236_BN3376_GB_LB4u5 29.02.2008 18:06 Uhr Seite 7