Filter
Top Products
- 10 -
Laser marking
The appliance contains a Class 2 laser. NEVER direct the laser beam at
people or animals. NEVER look directly into the laser. The laser can cause
serious eye damage.
You can use laser marking for the exactly horizontal positioning of pictures,
shelves etc.
1. Place the function switch
q
to „Laser“. A laser line is projected.
Horizontal laser line
Attention!
Exercise caution with the holding pins. They are sharp and can cause injuries.
1. Hold the Manifold Measurer horizontally against the wall and align it with
the assistance of the spirit level
8
. The air bubble must stand between the
two marking lines.
2. Push both of the holding pins (
5
+
e
) buttons firmly downwards.
The pins lightly bore themselves into the wall so that the appliance
does not fall to the floor. The laser throws a horizontal line onto the wall.
Note:
The holding pins do not function on stone or metal walls.
The walls must have a soft upper surface.
Vertical laser line
1. Secure a strong thread in the eyelet above the measurement point
1
.
2. Hang the Multi-Measurement Detector on the wall at the position where
you want to project the vertical line. The Manifold Measurer hangs like
a plumbline, perpendicularly downwards. The laser throws a vertical
line onto the wall.
IB_KH3236_BN3376_GB_LB4u5 29.02.2008 18:06 Uhr Seite 10