Filter
Top Products
Installation
.
See Figure 13. Slide front grille to left; pull out to
remove. Slide air filter to left; pull out to remove.
Remove 4 screws securing front frame to chassis;
pull out on front frame to remove.
Figure 13. Removing Front Frame
1. Front frame
10. See Figure 14. On front rail, bend tab with hole
down toward window sill. Secure tab to sillwith %"
Phillips screw (Item F).
Figure 14. Installing Bottom Rail Screw
1. Front rail tab
2. Bottom rail screw
12. See Figure 15. Measure and cut window seal strip
(Item G) to width of window. Stuff window seal strip
between outdoor glass and top of indoor sash for
tightseal to keep out heat and insects.
Figure 15. Installing Seal Strip
1. Window seal strip
2. Outdoor sash
3. Indoor sash
13. To be sure air conditioner installation is correct,
review all stepsand ensure all parts are securely
fastened, as outlined in instructions. Iffinal
inspection shows installation is solid and complete,
air conditionercan be operated safely.
To begin operation, plug unit into electrical outlet.
11. Replace front frame, filter, and grille.