Filter
Top Products
Gallons/Liters option allows you to choose how the
water usage is displayed on the normal operating
screen. Move the black bar over Gallons or Liters and
press SELECT. Display will return to Units menu, press
SELECT once more to return to normal operating
screen. Display will show either "lpm" for liters per
minute or "gpm" for gallons per minute.
Grains/PPM option allows you to choose either grains
or parts per million. Move the black bar over Grains or
PPM and press SELECT. Display will return to Units
menu, press SELECT once more to return to normal
operating screen. All settings will be measured in grains
or parts per million.
Pounds/Kiloqrams option allows you to choose either
pounds or kilograms of salt used. Move the black bar
over Pounds or Kilograms and press SELECT. Display
will return to Units menu, press SELECT once more to
return to normal operating screen.
SERVICE MODE:
Choices are Time Options, Diagnostics, Set Model and
Factory Defaults.
Time Options has several selections. Clean Time,
Backwash Time, Fast Rinse Time and Max
Days/Recharges can be modified to different time set-
tings. Use the UP or DOWN arrows to change the num-
ber of minutes desired for each cycle and press the
SELECT key. Screen returns to Time Options menu.
Press SELECT once more to return to normal operating
screen.
Diagnostics is a view only screen that displays informa-
tion about the softener. What position the valve is in, if
the motor is on or off, is the position switch open or
closed, is some of the information on this screen.
Set Model screen changes the model code from either
H46 or H47 to HF45. H46 or H47 are the required
codes for your softener to function properly.
Factory Defaults resets all settings. You must repro-
gram the timer to any customized settings if this option
is used.
SERVICE MODE
Time Options
Diagnosics
Set Model
Factory Defaults
Back
Exit
A V CHANGE
SELECT
FIG. 49
Questions? Call The Kenmore Water Line 1-800-426-9345
27