Kenmore 625.38426 Water System User Manual


 
Language for all screens can be in English, Spanish or
French. Move the black bar to Language, and press
SELECT. Move black bar over your choice and press
SELECT. Screen returns to Settings Menu.
NOTE: If Language has been mistakenly changed,
press SELECT button until you see English, Espa_ol
and Franqais in the display. The maximum number of
presses is six and it could be fewer depending on
which screen was displayed. Use the UP or DOWN
arrows to place the black bar over language desired.
Press SELECT twice to return to normal operating
screen.
Present Time changes the current time of the faceplate.
Be sure to have correct AM or PM time, or softener will
recharge at the wrong time of day. One press of the UP
or DOWN button changes the time by one minute inter-
vals. Press and hold either the UP or DOWN arrow, to
scroll through the time at a faster rate.
Hardness changes the hardness setting. Default is 25.
Pressing the UP or DOWN button changes the number by
one. Once correct number is shown, press SELECT to
change to new setting.
Recharge Time is the when the softener is scheduled to
start a recharge. Default is 2:00 AM. Using the UP or
DOWN arrows changes the time by one hour increments.
When the desired time is shown, press SELECT to
change and return to Settings menu.
OPTIONS:
Choices are Salt Options, QuickCharge, Rinse Option
and Recharge Count.
Salt Options has several selections:
When salt is added to tank, Salt Level must be changed
to the new salt level in the tank. Use the UP or DOWN
arrows to set. Observe the bars and the corresponding
number value in the display. This number must match the
number on the brine tube in the brine tank that the salt
level is closest to. When the correct number is displayed,
press the SELECT key. Screen will return to Salt Options
screen. The salt monitor is an estimate of your salt level;
accuracy depends on type of salt used and regeneration
characteristics.
NOTE: The display automatically defaults to this
screen and the tank light turns on when the salt
cover is opened on the softener and returns to nor-
mal operating screen when salt cover is closed.
Language
English
Espafiol
Frangais
/_ V CIIANGE SELECT
/_ V CIIANGE SELECT
Ihu-dness:
_Grains
/_ V CIIANGE SELECT
Recharge Time:
_AM
/_ V CIIANGE SELECT
OPTIONS
Salt Options
QuickChargc
Rinse Option
Recharge Count
Back
Exit
/_ V CHANGE
SELECT
_ Salt Level: m
/_ V CIIANGE
SELECT
FIG. 37
FIG. 38
FIG. 39
FIG. 40
FIG. 41
FIG. 42
Questions? Call The Kenmore Water Line 1-800-426-9345
24